Paint Factory Metallic Paint Shimmering Gold 300ml, Sutiable for exterior and interior use on metal, wood and concrete

PAINT FACTORY METALLIC PAINT will adhere to interior and exterior surfaces including concrete, metal and wood. Preparation Remove all loose rust and flaking paint with a wire brush, wet and dry paper or steel wool. When dry sanding, wear a suitable fast mask to avoid dust inhalation. Special precautions should be taken during the surface preparation of pre surfaces over wood and metal as they may contain harmful lead. Using a suitable diluted detergent, remove all grease, grime and dirt and allow to air dry. Always patch test on an inconspicuous area or card/paper and allow to fully dry to ensure the suitability of this product. Directions Use only as directed. Stir well before use. For brush applications, do not thin. One coat should be sufficient if applied to previously painted surface which is in a good condition. On bare or rusty services, a second coat may be required. After use, clean brush with a suitable brush cleaner. Store in a cool, dry, well-ventilated place. Caution This product is not recommended for large surface areas such a ceilings, floors or walls. Do not store in extremes of temperature or in direct sunlight. Due to printing limitations, any colour indication depicted on front of this can is only intended as a guide. Coverage Up to 2.75m2/litre depending on surface and method of application.

• With this amazing metallic paint, you will be able to achieve the look of your dreams. This Paint is ideal for providing a metallic finish to wherever you desire. Sutiable for exterior and interior use on metal, wood and concrete. The product is oil based. Product Description: Bring elegance and sophistication to your DIY projects with Paint Factory Metallic Paint in Shimmering Gold. This 300ml tin is perfect for giving a luxurious finish to furniture, walls, and decorative accents, creating an instant transformation with its brilliant, shimmering effect.
• Caution This product is not recommended for large surface areas such a ceilings, floors or walls. Do not store in extremes of temperature or in direct sunlight. Due to printing limitations, any colour indication depicted on front of this can is only intended as a guide
• Directions Use only as directed. Stir well before use. For brush applications, do not thin. One coat should be sufficient if applied to previously painted surface which is in a good condition. On bare or rusty services, a second coat may be required. After use, clean brush with a suitable brush cleaner. Store in a cool, dry, well-ventilated place.
• Mix Well Before Use Preparation Remove all loose rust and flaking paint with a wire brush, wet and dry paper or steel wool. When dry sanding, wear a suitable fast mask to avoid dust inhalation. Using a suitable diluted detergent, remove all grease, grime and dirt and allow to air dry. Always patch test on an inconspicuous area or card/paper and allow to fully dry to ensure the suitability of this product.